$17.00 - $127.00
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
- Cleaning oil and all weather oils for Rohloff speedhubs
Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$6.50 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air
$6.50 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
Holy Cow is the latest in the Rock N' Roll Lubrication's line up of chain lubes. Holy Cow is not flammable and is a very settled wet lube that is as clean or cleaner than most dry lubes. Holy Cow preforms fantastic, like the other Rock N' Roll chain lubes. However, being a little bit of a wet-style chain lube, what little dirt or grit that does get on the chain can be wiped away quickly and easily with the chain looking great again. For all you riders that like to ride with a wet lube but could live better without all the dirt and grit of a wet lube, Holy Cow is just for you.
$9.00 - $31.90
- 3-In-1 Bio-degreaser, hand cleaner, and stain remover - 100% Natural, no citrus, palmas or petroleum
Miracle Red is a 3-in-1 bio-degreaser, hand cleaner and stain remover. - 100% natural, no citrus, pumice or petroleum products - This product will float the grease out of finger prints and will remove grease from white T- shirts like a miracle
- Premium red formula all-purpose bicycle grease
$8.42 - $17.90
- Premium greyish-black grease - Great for suspension pivots, seatposts, joints, etc
Ritchey's Liquid Torque creates extra friction between 2 surfaces, reducing tightening torque required to avoid slippage. - Creates extra friction between two surfaces, allowing tightening torque to be reduced by up to 30% - Particularly useful when over-clamping can damage sensitive components such as carbon bars or steerer tubes - Approved for use with carbon, steel, alloy and titanium surfaces - Use with Ritchey Torqkey to ensure safe installation of Ritchey bars and stems
Wetsuit care and repair cement to add longer life to any wetsuit. - Repairs tears and nicks to the Neoprene on wetsuits - Repair of ripped seams or tears that are completely through the underlying material may require stitching in addition to cement application - Black color matches most wetsuits - 4-ounce jar with applicator brush
Problem Solvers Frame Saver aerosol can with spout, 4.75oz. - Tried and true internal rust protection for steel frames - Protect your investment—each application lasts for years - One 4.75-ounch can treats 3 – 5 frames
- 100% Natural and biodegradable, Without animal products - Apply a small amount, Work in, Then rinse off with water - Leaves skin clean with a subtle forest scent
Designed for mixed to wet conditions, Chainj is an advanced biodegradable vegetable/synthetic oil blend engineered to provide superior efficiency, wear protection, and durability. The vegetable oil is not only sustainable but also associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Chainj features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too! - Dissolves and isolates dirt for lasting performance in mixed conditions - Superior durability, wear protection and lubrication - Biodegradable, non-toxic, vegetable/synthetic formula
$14.00 - $65.00
Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.
Formulated with Pedro's exclusive CleanTech Chemistry, Enduro Pemium Wet Lube blends advanced wet and dry lube technology for incredible wet lube performance in mixed to wet conditions, without the mess. Noticeably elevates efficiency, runs quiet, reduces wear, long-lasting, and fully water-proof. - Extreme lasting performance with less mess in mixed to wet conditions - Elevates efficiency, runs quiet, reduces wear, and fully waterproof - Safe plant-based ingredients
- Environmentally benign foaming bike wash - Can be used with or without water
- Most universal Pedro's lube - New high-performance formula lifts dirt away from the chain surface leaving a soft, Icy-Slick protection/Lubrication barrier
Syn Lube is formulated with extreme pressure additives, corrosion inhibitors, and tackifiers to provide incredible wear protection, lubrication, and staying power in extreme wet and muddy conditions. - The original synthetic chain lube formulated specifically for mountain bikes - Superior wear protection, efficiency and durability for extreme conditions/mileage - Unique detergents break down and isolate dirt protecting the surfaces of your chain
Formulated with Pedro's exclusive CleanTech Chemistry, X Dry uses advanced polymer technology that drys to a unique semi-fluid film and provides clean and long-lasting performance in dry to mixed conditions. Noticeably elevates efficiency, runs quiet, reduces wear, and repels water and grime. - Clean and long-lasting performance in dry to mixed conditions - Elevates efficiency, runs quiet, reduces wear, and repels water and grime - Safe plant-based ingredients
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.